HD Video Conferencing Camera User Manual V1.4 (English)
9 Product Specification Model S M C Video Format 1080p/60, 1080p/59.94,1080p/50, 1080p/30, 1080p/29.97,1080p/25, 1080i/60, 1080i/59.94,1080i/50, 720p
10 Main Unit 1. Lens 2. Sensor for the Remote Commander 3. POWER lamp 4. STANDBY lamp 5. BOTTOM switches 6. Tripod screw hole 7. Fixing screw whole
11 IR Remote Controller Explanation 0. Standby Button Press this button to enter standby mode. Press it again to enter normal mode. (Note: Power
12 Notice: If a light behind the subject, the subject will become dark. In this case, press the backlight ON / OFF button. To cancel this function, p
13 USE IR Remote Controller When the camera is working, you can use remote controller to perform panning, tilting, zooming and focusing
14 3. Focus Control Focus Far: Press [FOCUS+] button (Note: Effective only in manual focus mode) Focus Near: Press [FOCUS-] button (Note: Effect
15 in the memory. 6. Recalling the Preset Press any of the numeric buttons 0-9directly to recall stored preset positions and settings. Note: No
16 RS-232CInterface Camera Windows DB-9 1.DTR 1.CD 2.DSR 2.RXD 3.TXD 3.TXD 4.GND 4.DTR 5.RXD 5.GND 6.GND 6.DSR 7.I
17 VISCA Network Configuration
18 Serial Communication Control In default working mode, the camera is able to connect to a VISCA controller with RS232C serial interface. The para
1 Preface Thanks for using this HD Video Conferencing Camera. This manual introduces the function, installation and operation of the HD camera. Prior
19 VISCA Command List Part 1 Camera-Issued Messages Ack/Completion Message Command Command Packet Comments ACK z0 41 FF Returned when the command is
20 Wide(Standard) 8x 01 04 07 03 FF Tele(Variable) 8x 01 04 07 2p FF p = 0(low) - 7(high) Wide(Variable) 8x 01 04 07 3p FF Direct 8x 01 04 47 0p 0q 0
21 Down 8x 01 04 04 03 FF Direct 8x 01 04 44 00 00 0p 0q FF pq: B Gain CAM_AE Full Auto 8x 01 04 39 00 FF Automatic Exposure mode Manual 8x 01 04 39
22 Down 8x 01 04 0E 03 FF Direct 8x 01 04 4E 00 00 0p 0q FF pq: ExpComp Position CAM_BackLight On 8x 01 04 33 02 FF Back Light Compensation ON/OFF Of
23 Down 8x 01 06 01 VV WW 03 02 FF speed) WW: Tilt speed 0x01 (low speed) to 0x14 (high speed) YYYY: Pan Position(TBD) ZZZZ: Tilt Position(TBD) Left
24 CAM_AFZone Top 8x 01 04 AA 00 FF AF Zone weight select Center 8x 01 04 AA 01 FF Bottom 8x 01 04 AA 02 FF CAM_DVIMode HDMI 8x 01 04 AB 02 FF DVI
25 y0 50 0B FF Iris priority y0 50 21 FF WDR y0 50 22 FF Low Light CAM_ShutterPosInq 8x 09 04 4A FF y0 50 00 00 0p 0q FF pq: Shutter Position CAM_Iri
26 vw: Socket Number VideoSystemInq 8x 09 06 23 FF y0 50 00 FF 1920x1080i60 y0 50 01 FF 1920x1080p30 y0 50 02 FF 1280x720p60 y0 50 03 FF 1280x720p30
27 CAM_GammaInq 8x 09 04 5B FF y0 50 0p FF p: Gamma setting (0x00~0x0A) CAM_AFZone 8x 09 04 AA FF y0 50 00 FF Top y0 50 01 FF Center y0 50 02 FF Bo
28 Part 4Custom control command Command Function Command Packaged Comments CAM_Power On 8x 02 16 16 16 65 FF Custom Power ON/OFF OFF(Standby) 8x 02 1
2 Contents 1. Note ··································································································3 2. Supplied Accessories
29 Pelco-D Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Up 0xFF Address 0x00 0x08 Pan Speed Tilt Speed SUM Down 0xFF Addr
30 Pelco-P Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8 Up 0xA0 Address 0x00 0x08 Pan Speed Tilt Speed 0xAF XOR Dow
31 Menu Setting1. MENU Press [MENU] button to display the main menu on the normal screen, using arrow button to move the cursor to the item to be set
32 60Hz Iris: Aperture value. Optional items: F1.8, F2.0, F2.4, F2.8, F3.4, F4.0, F4.8, F5.6, F6.8, F8.0, F9.6, F11.0, Close(Effective only in Manua
33 4. IMAGE Move the cursor to the Image item in the main menu and press [HOME] button, IMAGE menu appears, as shown in the following figure.
34 control or reverse) AF-Zone: Interested in focusing area, Optional items: Center, Bottom, Top AF-Sense: Automatic focusing sensitivity opti
35 Language: menu language, Optional items: EN, Chinese ColorSys: Set the DVI system, color in the analog signal, Optional items: YPbPr,
36 Restore: Confirm restore factory settings. Optional items: Yes, No Note: Press [HOME] button to confirm. 9. EXIT In the main menu and press [
37 Maintenance and Troubleshooting Camera Maintains If camera will not be used for a long time, please turn off the power switch, disconnect AC po
38 Control IR remote controller cannot control the camera 1. Change the battery 2. Check the camera working mode. 3. Check IR address of the Remot
3 Note Electric Safety Installation and operation must accord with electric safety standard. Caution to transport Avoid stress, vibration and s
4 Supplied Accessories When you unpack, check that all the supplied accessories are included: Camera ... 1 AC po
5 Quick Start Step1. Please check connections are correct before starting
6 Step2. Setting of the bottom switches Set both of the switch1 and switch2 to ‘OFF’. That is ‘Normal Working Mode’. Step3. Setti
7 Step4. Press the Switch ON/OFF button on the rear of the camera, the power lamp light. Step5. Pan-Tilt will rotate to the maximum position of top
8 Features 1. Integrated 72.5 degree wide-angle lens for the first time, Optical 12x. 2. Camera provides a high performance in low illumination situa
Kommentare zu diesen Handbüchern