Infocus IN5144A Bedienungsanleitung PDF herunterladen (Seite 117)

117

• When the inside of the projector becomes overheated, the projector

will automatically shut down (for safety purposes) and the indicator lamps may

also be turned off. In this case, disconnect the power cord, and wait at least 45

minutes. After the projector has cooled down sufciently, verify the lamp and

lamp cover are securely attached, and then turn the power on again.

NOTE

For the SECURITY indicator, see SECURITY INDICATOR in the SECURITY

menu (93).

For the SHUTTER indicator, see the section "Temporarily shutting the screen"

(36).

The FILTER indicator shows the condition of the air lter. Utilize this feature to

keep the inside of the projector in good condition.

FILTER indicator Description

OFF

The air lter is clean.

No maintenance is needed.

Solid

Orange

The air lter is getting clogged.

The lter needs to be cleaned.

Solid

Red

The air lter is clogged.

You must turn the power off and clean the air lter

immediately.

Troubleshooting

Regarding the indicator lamps (continued)

Resetting all settings

When it is difcult to correct all of the menu settings, FACTORY RESET in the

SERVICE item of the OPTION menu (75) can be used to reset all settings (except

LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, STANDBY MODE,

COMMUNICATION, SECURITY and NETWORK) to their factory defaults.

• The FILTER indicator might turn solid orange or red when something

blocks the intake vents even though the air lter is clean.

•

The FILTER indicator might light up differently from other indicators or display

messages related to cleaning the air lter. Follow the messages that are

displayed earlier.

NOTE

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 123

Keine Kommentare

Infocus IN5144A Bedienungsanleitung Seite 117