Infocus IN5122 Bedienungsanleitung PDF herunterladen (Seite 15)

Setting up

Speakers

(with an amplier)

Wired

remote

control

(optional)

Monitor

Microphone

system

Connecting with your devices (continued)

• If loud feedback noise comes from the speakers, move the micro-

phone away from the speaker.

NOTE

•

You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug.

In that case, the built-in speaker outputs the sound from the microphone, even

when the sound from the projector is output. You can input line level signal to

the MIC port from equipment such as wireless microphone. Select HIGH in the

MIC LEVEL item of the AUDIO menu when you input line level audio signal

to the MIC port. In the normal mode, the volume of the microphone can be

adjusted separately from the volume of the projector using the menu. (41, 42)

In the power saving mode, the volume of the microphone is adjustable with the

VOLUME +/- buttons on the remote control, in synchronization with the volume

of the projector. (

18)

Even when the sound of projector is set to mute mode by the AUDIO SOURCE

feature (41), the volume of the microphone is adjustable.

The MUTE button on the remote control works on the sounds of the

microphone and the projector regardless of which mode is being used. (18)

• This projector doesn't support plug-in power for the microphone.

Microphone feature

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 96 97

Keine Kommentare

Infocus IN5122 Bedienungsanleitung Seite 15