Infocus IN5122 Bedienungsanleitung PDF herunterladen (Seite 91)

Troubleshooting

Regarding the indicator lamps

When the LAMP, TEMP and POWER indicator operate differently than usual,

follow the instructions below in the following table.

For the SECURITY indicator, see SECURITY INDICATOR in the SECURITY menu.

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Solid

Orange

Turned

off

Turned

off

The projector is in a standby state.

Please refer to the section “Power on and off”.

Blinking

Green

Turned

off

Turned

off

The projector is warming up.

Please wait.

Solid

Green

Turned

off

Turned

off

The projector is in an on state.

Ordinary functions can be performed.

Blinking

Orange

Turned

off

Turned

off

The projector is cooling down.

Please wait.

Blinking

Red

(discre-

tionary)

(discre-

tionary)

The projector is cooling down. An error has

been detected.

Please wait until POWER indicator nishes blinking,

and then follow the associated instructions below.

Blinking

Red

Solid

Red

Solid

Red

Turned

off

The lamp will not light, and the projector may be

overheating.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufciently cooled down, please conrm the following

items, and then turn the power on again.

• Are the air vents blocked?

• Is the air lter dirty?

• Is the room temperature higher than 95°F (35°C)?

If the same indicator re-appears after xing the above,

please change the lamp referring to the section

Replacing the lamp.

Blinking

Red

Solid

Red

Blinking

In Red

Turned

off

The lamp cover has not been properly xed.

Please turn the power off, and allow the projector

to cool down at least 45 minutes. After the projector

has sufciently cooled down, please verify that the

lamp cover is securely and properly fastened. After

performing any needed maintenance, turn the power on

again.

If the same indicator re-appears after xing the

above,

please contact your dealer or service company.

Blinking

Red

Solid

Red

Turned

off

Blinking

Red

The cooling fan is not operating.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufciently cooled down, please conrm that no foreign

matter has become caught in the fan, etc., and then

turn the power on again.

If the same indicator re-appears after xing the above,

please contact your dealer or service company.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 97

Kommentare zu diesen Handbüchern

Keine Kommentare

Infocus IN5122 Bedienungsanleitung Seite 91

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Infocus IN5122