Infocus IN5122 Bedienungsanleitung PDF herunterladen (Seite 92)

Troubleshooting

Regarding the indicator lamps (continued)

• For safety purposes, the projector will automatically shut down (and

the indicator lamps will turn off) when the projector becomes overheated. In

this situation, disconnect the power cord, and wait at least 45 minutes. After the

projector has sufciently cooled down, please conrm that the lamp and lamp

cover are securely and properly fastened, and then turn the power on again.

NOTE

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking

Red

Solid Red

Turned

off

Solid

Red

There is a possibility that the projector has

overheated.

Please turn the power off, and allow the projector to cool down at least

20 minutes. After the projector has sufciently cooled down, please check

the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air lter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indicator re-appears after xing the above, please

review FAN SPEED HIGH in the OPTION>SERVICE menu

(



52)

Solid

Green

Simultaneously

blinking in Red

It is time to clean the air lter.

Please immediately turn the power off, and clean or

change the air lter referring to the section Cleaning

and replacing the air lter. After cleaning or changing

the air lter, please be sure to reset the lter hours.

After the remedy, reset the power to ON.

Solid

Green

Alternatively

blinking Red

There is a possibility that the interior portion

has become overcooled.

Please use the unit within the usage temperature

parameters (5°C to 35°C).

After the treatment, reset the power to ON.

Blinking

Green for

approx. 3

seconds.

Turned

off

Turned

off

At least 1 Power ON schedule is saved to the

projector.

Please refer to Schedule Settings in the Network

Guide.

Resetting all settings

When you cannot easily correct the projector settings, you can use the FACTORY

RESET feature in the OPTION>SERVICE menu (56) to reset the all the projector

settings (except for: LANGUAGE, RESET LAMP HOURS, RESET FILTER HOURS,

FILTER MESSAGE, SECURITY and NETWORK) to factory default.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97

Kommentare zu diesen Handbüchern

Keine Kommentare

Infocus IN5122 Bedienungsanleitung Seite 92

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Infocus IN5122