USB Display
The projector can display images transferred from a computer via an USB cable (10).
In the OPTION menu, choose USB DISPLAY for the USB TYPE B item. When you connect
your computer to the USB TYPE B port on the projector using a USB cable, the projector
will be recognized as a CD-ROM drive on your computer. Then, the projector software,
“LiveViewerLiteUSB.exe”, will run automatically and the application, “LiveViewer Lite for
USB”, will be available on your computer for USB Display. The application, “LiveViewer Lite
for USB”, will automatically close when the USB cable is unplugged.
• If the software does not start automatically (this is typically because
CD-ROM autorun is disabled on your OS), follow the instructions below.
(1) Click the [Start] button on the toolbar and select “Run”
(2) Enter F:\LiveViewerLiteUSB.exe and then press the [OK]
• CD-ROM autorun is disabled when the screen saver is running.
•
The image transmission from the computer is suspended when the password-
protected screen saver is running. To resume the transmission, exit the screen saver.
• Check our website (www.infocus.com/support) for the latest version of the
software and its manual. Follow the upgrade instructions on the website.
NOTE
If your CD-ROM drive is not drive F on your computer, you will need to
replace F with the correct drive letter assigned to your CD-ROM drive.
This application will appear in the Windows notication
area once it starts. You can exit the application from
your computer by selecting “Quit” on the menu.
Hardware and software requirements for computer
• OS: One of the following. (32 bit version only)
Windows
®
XP Home Edition /Professional Edition
Windows Vista
®
Home Basic /Home Premium /Business /Ultimate /Enterprise
Windows
®
7 Starter /Home Basic /Home Premium /Professional / Ultimate /Enterprise
• CPU: Pentium 4 (2.8 GHz or higher)
• Graphic card: 16 bit, XGA or higher
• Memory: 512 MB or higher
• Hard disk space: 30 MB or higher
• USB Port
• USB cable : 1 piece
• “LiveViewer” (refer to the Network
Guide) and this application cannot be used
simultaneously. If you connect your computer
to the projector using a USB cable when
“LiveViewer” is running, the following message will display.
• If any application software has a rewall on your computer, disable the rewall
feature (refer to the user's manual).
• Some security software may block image transmission. Please change the
security software setting to allow the use of "LiveViewer Lite for USB".
NOTE
Kommentare zu diesen Handbüchern