Infocus IN5122 Bedienungsanleitung PDF herunterladen (Seite 59)

NETWORK menu

Remember that incorrect network settings on this

projector may create problems on your network. Be

sure to consult with your network administrator before

connecting to an existing access point on your network.

Select “NETWORK” from the main menu to access the

following features.

Highlight an item using the ▲/▼ cursor buttons on the

projector or remote control, and press the ► cursor button on the projector or

remote control, or SELECT button on the remote control to select the item. Then

make adjustments per the following table.

Refer to the Network Guide for NETWORK operation details.

NETWORK menu

• If you are not utilizing SNTP (Date/Time Settings in the Network

Guide), then you must set the DATE AND TIME during initial installation.

• If POWER SAVING MODE is set to ENABLE in the SETUP menu, network

communication control will be disabled when the projector is in power saving

mode. To avoid this, set the POWER SAVING MODE to DISABLE (40) before

setting up network communication control.

NOTE

Item Description

SETUP

Selecting this item displays the SETUP

menu for the network.

Use the ▲/▼ buttons to highlight an item,

and the ► or SELECT button on the remote

control to select the item.

DHCP

(Dynamic Host

Conguration

Protocol)

Use the ▲/▼ buttons to turn DHCP on and off.

ENABLE

DISABLE

Select DISABLE when the network is not DHCP

enabled.

• When “DHCP” is set to “ENABLE”, it takes a

little time to obtain an IP address from the DHCP

server.

• The Auto IP feature will assign an IP address if

the projector cannot obtain an IP address from the

server (even if DHCP is “ENABLE”).

(continued on next page)

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 96 97

Kommentare zu diesen Handbüchern

Keine Kommentare

Infocus IN5122 Bedienungsanleitung Seite 59

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Infocus IN5122